EXPERIENCE CUSTOM · PLUMRIDGE
Simple Lift Cellular Shade
Room settings and enhanced product images are illustrative. Select fabric color from a physical sample.
A custom cellular shade operated by a slim wand and ring. Pull the wand down to lower the shade; pull the ring down to raise it. Choose from compatible custom fabrics for your room.
Enter your actual opening width for inside mount; the factory takes the ¼″ deduction. Measurement controls require JavaScript.
At a glance
- Custom sizes with compatible 9/16″, ¾″ or 7/16″ cellular fabrics
- Coordinated aluminum rails with a ¾″ headrail
- Wand on the right as standard; alternate side by request
- Five wand colors to coordinate with the fabric
Size & light control
Published limits: 15″ minimum width, 118″ maximum width, 118″ maximum height and 97 square feet maximum area. Fabric and configuration limits also apply.
Blackout describes the fabric; light can still enter around the edges. Mounting position and overlap affect the result.
Mounting & headrail fit
Minimum inside-mount depth: ½″. Fully recessed (flush) fit: 2¾″.
Custom width and length to order.
Colors & collections
Browse Custom Price Groups 1–10 for compatible fabrics in 9/16″, ¾″ or 7/16″ cell sizes. Simple Lift does not use the 1¼″ fabric options shown in the full gallery. We confirm compatibility before ordering.
View all Cellular Shade Colors & Price Groups
Who takes the ¼″ deduction?
For inside mount, enter and submit the actual opening width unchanged. The factory takes the ¼″ deduction from the total width once. Neither the customer nor Plumridge should subtract it. For outside mount, submit the desired finished coverage width; there is no factory width deduction.
What measurements should I send?
Send width first, then required length, plus recess depth for inside mount. Measure each window separately. Check handles, stops and the fixing surface. Copy your measurements above and send them with the preferred color, fabric and quantity for a Design Consultation.
Cellular Shade FAQs
What does a 9/16″, ¾″ or 1¼″ cell size mean?
These are nominal fabric cell/pleat sizes, specified by the manufacturer and shown on the fabric sample. The measurement describes one repeating honeycomb fabric fold seen in the side profile. For example, 9/16″ is 0.5625 inch and ¾″ is 0.75 inch. It does not describe the width of your window, the overall shade length or the recess depth.
Why choose a different cell size?
Smaller cells make finer, more closely spaced horizontal lines; larger cells give fewer, broader pleats and often suit larger windows. The choice also changes the available fabrics, colors and compatible operating systems. Choose by appearance and the options available for your shade, then check its size limits and mounting-depth requirements separately.
Does a larger cell always insulate better or need the same mounting depth?
Insulation depends on the complete fabric, opacity and cell construction. Single cell has one layer of air pockets; double cell and cell-in-a-cell use a second layer or nested pocket. Cell size alone does not establish insulation performance or the space required by the headrail. Use the listed mounting and flush-fit depths for your selected shade and motor.