EXPERIENCE CUSTOM · PLUMRIDGE
Simply Cordless Cellular Shade
Room settings and enhanced product images are illustrative. Select fabric color from a physical sample.
A clean, comfortable finish with an easy cordless lift. Choose softly filtered daylight or a blackout fabric, then select the stock size and width trim for your window.
Enter your actual opening width for inside mount; the factory takes the ¼″ deduction. Measurement controls require JavaScript.
At a glance
- 9/16″ single-cell honeycomb fabric
- Light-filtering or blackout fabric options
- Hidden installation brackets
- Color-coordinated vinyl headrail and bottom rail
Size & light control
Stock widths: 30″, 38″, 54″ and 72″. Stock drops: 48″ or 72″. Minimum trimmed width starts at 18″, depending on the stock width.
Blackout describes the fabric; light can still enter around the edges. Mounting position and overlap affect the result.
Mounting & headrail fit
Headrail: 1¾″ deep × 1⅛″ high. Including the bracket: 1⅞″ deep for a flush fit.
Stock length is not shortened. The factory cuts width only.
Colors & collections
Stock Collection — priced from this shade’s stock table, separate from Custom Price Groups 1–10. Screen colors are approximate; select from a physical sample.
View all Cellular Shade Colors & Price Groups
Who takes the ¼″ deduction?
For inside mount, enter and submit the actual opening width unchanged. The factory takes the ¼″ deduction from the total width once. Neither the customer nor Plumridge should subtract it. For outside mount, submit the desired finished coverage width; there is no factory width deduction.
What measurements should I send?
Send width first, then required length, plus recess depth for inside mount. Measure each window separately. Check handles, stops and the fixing surface. Copy your measurements above and send them with the preferred color, fabric and quantity for a Design Consultation.
Cellular Shade FAQs
What does a 9/16″, ¾″ or 1¼″ cell size mean?
These are nominal fabric cell/pleat sizes, specified by the manufacturer and shown on the fabric sample. The measurement describes one repeating honeycomb fabric fold seen in the side profile. For example, 9/16″ is 0.5625 inch and ¾″ is 0.75 inch. It does not describe the width of your window, the overall shade length or the recess depth.
Why choose a different cell size?
Smaller cells make finer, more closely spaced horizontal lines; larger cells give fewer, broader pleats and often suit larger windows. The choice also changes the available fabrics, colors and compatible operating systems. Choose by appearance and the options available for your shade, then check its size limits and mounting-depth requirements separately.
Does a larger cell always insulate better or need the same mounting depth?
Insulation depends on the complete fabric, opacity and cell construction. Single cell has one layer of air pockets; double cell and cell-in-a-cell use a second layer or nested pocket. Cell size alone does not establish insulation performance or the space required by the headrail. Use the listed mounting and flush-fit depths for your selected shade and motor.